| S | M | L | XL | |||
| US | 4–7 | 6–9 | 8–11 | 10–13 | ||
| EURO. | 35–40 | 38–42 | 41–45 | 43–47 | ||
** Fit may vary depending on boot style.
Fitting Gaiters: "WRAP IT, THEN STRAP IT"
• Wrap gaiter around leg and boot top with OR logo on outside of ankle
• Close hook/loop front closure and fasten shear tab
• Attach hook through boot laces
• Tighten top hook/loop Cinch-Strap
• Fasten instep strap
INTENDED USAGE:
Used over plastic or leather mountaineering boots, worn with thick leg insulation
+ 3-layer 70D Taslan Gore-Tex® upper leg section
+ 1000D Cordura® reinforced inner leg section
+ 1000D Cordura® boot section lined with coated 8 oz. packcloth
+ Additional circumference to accommodate bulky layers and plastic boots
+ Hook/loop Cinch-Strap top closure
+ 2-inch wide hook/loop front closure with double-needle stitching
+ Hook/loop shear tab prevents separation of front closure
+ Field-replaceable urethane coated nylon instep strap
Avg. weight: 12.1 oz./343 g (size L, per pair)
Used over plastic or leather mountaineering boots, worn with thick leg insulation
+ 3-layer 70D Taslan Gore-Tex® upper leg section
+ 1000D Cordura® reinforced inner leg section
+ 1000D Cordura® boot section lined with coated 8 oz. packcloth
+ Additional circumference to accommodate bulky layers and plastic boots
+ Hook/loop Cinch-Strap top closure
+ 2-inch wide hook/loop front closure with double-needle stitching
+ Hook/loop shear tab prevents separation of front closure
+ Field-replaceable urethane coated nylon instep strap
Avg. weight: 12.1 oz./343 g (size L, per pair)



