New product, technology & Deals
Receive updates by email and be the first to know

Project Gloves™


Lean, Mean Sending Machines
COLOR black
Infinite Guarantee
Placing protection on ice sucks, but less so with the new Project gloves. We made maximizing dexterity the motivation behind every material and design choice with this baby. From the precision 3DFit Technology™ and waterproof GORE-TEX Grip liners that remove every millimeter of excess bulk, to the supreme grip of Pittards® Oiltac leather and bonded, no-slip PrimaLoft® Grip insulation, they bring warmth and precision to your most technical winter projects.
Fabric :
GORE-TEX Grip Insert
90% nylon
10% spandex stretch laminated twill - Pittards® OilTac water-resistant leather - EnduraloftTM insulation 100% polyester / 266 g/m2 at back of hand
PrimaLoft® Gold with Grip 100% polyester insulation 60 g/m2 at palm
100% polyester tricot lining
Weight :
6.8oz / 192g Avg. Weight for size L


Great active gloves


Warm. Mainly used for active winter pursuits - ski touring, mountaineering, etc. Can work as fall/spring belay gloves as well. Rugged and water shedding. Best gloves I own.



Awesome sort of


These are awesome gloves out of the box. Just what I was looking for. A burly glove with a shorty wrist cuff. They kept my hands warm during alaksa backcountry missions. I have XL hands so I wear Xl gloves. The XLs fit my hand great but I did notice they were a little snug to get on and off around the wrists. After about 1month I noticed the seams were spiltting at the wrist. Pretty much where the glove has to stretch to get my hand in. If it split on only one glove I would have thought I did something like snag it. But both gloves blew out in the same spot. I feel,like the wrists need a little more stretch. Anyway, OR had me send them back and It looks like they will make it right. Bummer because they seemed like the perfect glove for me.



I will definitely buy this pair of gloves again and again .


I use the gloves for work.

Bowling Green Va


Nice gloves


I'm using these for cycling in rainy Seattle. They keep my hands super dry. They are also super easy to get on/off when on the bike due to the pull tabs. Although these are ice climbing gloves they are not warm enough when it's below freezing on a bicycle. My only issue so far has been that the tab connecting the gloves pulled out of the glove so I have to sew it back on. The grip on the palms seem to wearing but it's not an issue yet (I worn about 10 times).



Waterproof gloves that actually have a grip


Just started using them. They are warm and comfortable but not too bulky. Feels as though you can still do functional activities with them on.



They don't keep my hands warm


I went to the OR store and said my hands are always cold when I bike, and I wanted gloves that would keep my hands super warm and dry biking in the rain in Seattle. They recommended these, along with some liners. The gloves alone are supposed to be good down to 15 degrees Fahrenheit, but I tried biking in them, both with and without the liners, on a sunny 39 degree day, and my hands were completely frozen. Apparently my hands get cold more easily than most!

Seattle, WA


perfect gloves


Fits like a... Great fit, not too bulky, just got them and use outside in first snow - worked like a charm. Low profile, not too bulky. Planning to use them skiing, camping and on chilly days on the motorcycle.



Best OR Gloves Yet


The fit and finish of these is top notch. I've owned several other pair of OR gloves and unfortunately I couldn't say all of them had great fit and finish, these however are exceptional. Not even a loose thread or misplaced stitch that I can find after a thorough examination. The "3D Fit" contour design as OR calls it makes these feel like they were custom made for my hands. I usually wear a size large winter glove so I can fit a thin glove liner on when it gets below 0F so I purchased these in a size large and glad I did. They're made to not use a glove liner to give you the most dexterous feel so when sliding my hand in the wrist is pretty snug, but when on the gloves wrap around my hands without squeezing them. I hate bad QC gloves with thumbs longer than your pointer finger or ring fingers longer than your middle fingers, I experienced this on past OR gloves (Overlord Sensor and Suppressors), but these are all good length with very little excess. The grip of these are nice and sticky. I haven't seen palm material like these on gloves before before, almost like a rubbery canvas like material that maintains grip in the cold, another pet peeve of mine are gloves that grip well at room temp but turn into smooth slippery plastic once freezing, experienced this with OR Illuminator Sensors. These have soft leather reinforced areas that appear where ski poles would wear most, but I don't ski. There's also a good amount of padded cushion on the back of the hand and wrist, also looks like they're placed it in the most common ski pole strap friction areas. There's a thin primaloft insulation surrounding the whole glove. It's very thin to help with grip but coupled with the windproof/waterproof gore-tex outer, they're very warm so far but it's been unseasonably warm so far in WI. My only gripe, and it's a very minor one, is that the wrist is a bit snug when putting them on but it's not noticeable when on. If gloves or hands are wet, they could be a pain to put on.

Madison, WI


Can't wait to use these!


These seem "as advertised" and the fit and feel could not be better! So of OR's gloves feel like they used my hands fit fitting, so I feel fortunate and have several models from them. Of course I can't see speak of their durability yet but they seem well constructed and I expect to have them for awhile.

New York


Initial impressions are very good!


I just picked up a pair of Project gloves and I'm excited about the fit and feel of the gloves. The distribution of insulation was exactly what I was looking for: thin on the palm for good feel when holding a ski pole, ice axe, or handlebars; thick on the back of the hand to keep some heat in when the weather gets cold or the wind is blowing hard (60mph on the sled!). I haven't put them to work yet but I have high hopes for this glove. I wish there was a severe-use version available with the same insulation strategy but a full leather shell and tougher leather palm/fingers. Waterproof membranes seem to fail but regular waxing works well on all-leather gloves and keeps them alive a lot longer. I expect I'll wear these out quickly if I have to scrape snow and ice off of splitboard bindings a lot this winter.

Fairhaven/Mt Baker



4.4 13






Is the Gore-Tex just in the palms or is it a liner for the entire glove?


Hi RC, The Project Gloves have a Gore-Tex glove insert around the entire glove. The Gore-Tex membrane is sandwiched between the Outer fabric and the Lining of the gloves so you hands stay dry (repels water, but allows moisture vapor to pass through). Thanks for contacting OR,


What temps would project gloves work for.

Papa bear

Hi Papa bear, The Comfort Range we have is subjective, however, we have it listed as -15 F to 15 F (-26 C to -9 C). Thanks for contacting OR,


So when the specs that GOR-TEX grip insert, does that encompass the entire glove, or just the palm? I'm looking for a totally waterproof glove and just wanted to make sure it isn't just the grip. Thank you.

Uhh, Ted

Hi Uhh, Ted, The GORE-TEX insert is inserted between the Outer Fabric and the Lining, it encompasses the entire glove. The benefit of having an insert vs a seam-sealed glove is that they allow the glove to be dexterous and tactile. All GORE-TEX inserts are leak tested and will keep your hands dry and warm. Thanks for contacting OR,


Which gloves are the most durable ? Strongest/heavy duty/waterproof/tear-proof/leather/ etc


Hi Noah, If you're looking for a heavy duty glove with good dexterity, that's waterproof, and has a leather palm then the Project glove is the best glove for your needs. The gloves, however, aren't tear-proof, but still durable. Thanks for contacting OR, Paul

Gloves Size guide


Measurement shown in:

*Gloves are Unisex unless marked Men's, Women's or Kids'

MEN'S S/7 M/8 L/9 XL/10
CIRCUM 7 – 7¾17.8 – 19.7 8 – 8½20.3 – 21.6 9 – 9½22.8 – 24.1 9½ – 1024.1 – 25.4
LENGTH 6½ – 716.5 - 17.8 7½ – 819.7 - 20.3 8½ – 921.6 - 22.8 9 – 9½22.8 - 24.1
WOMEN’S S/6 M/7 L/8
CIRCUM 6½ – 7¼16.5 – 18.4 7¼ – 818.4 – 20.3 8 – 8¼20.3 – 21
LENGTH 6½ – 716.5 - 17.8 7 – 7½17.8 – 19.7 7½ – 8+19.7 - 20.3+
UNISEX XS/6 S/7 M/8 L/9 XL/10
CIRCUM 6½ – 7¼16.5 – 18.4 7¼ – 818.4 – 20.3 8 – 8½20.3 – 21.6 8½ – 9½21.6 – 24.1 9½ – 1024.1 – 25.4
LENGTH 6½ – 716.5 - 17.8 7 – 7½17.8 – 19.7 7½ – 819.7 - 20.3 8 – 920.3 – 22.8 9 – 9½22.8 - 24.1
KID’S S/1 M/2 L/3 S/4 M/5 L/6
AGE 2 – 3Y 3 – 4Y 4 – 5Y 6 – 8Y 9 – 11Y 12 – 14Y
CIRCUM 4½ – 5½11.4 - 14 5½ – 614 – 15.2 6 – 6½15.2 - 16.5
LENGTH 4½ – 5¼11.4 - 13.3 5¼ – 613.3 – 15.2 6 – 6½15.2 - 16.5

How to measure

Measure around a flat hand at the knuckles,do not include your thumb. Also measure your hand length from the base of your palm to the end of your middle finger. Use the larger of the two measurements to select your glove size.